Training courses for HSE professionals / Training / Services

Мы YKK

Training courses for HSE professionals

Notes:

Place of the course Training centers UKK Atyrau, Aktau, Bautino, Karabatan, Offshore, and on the territory of the Customer subject to compliance, as well as the recruitment of the required number of students.

Industrial re-training is delivered in accordance with the Rules and regulations of Labor Protection and Safety; Rules and regulations inspection of Safety of Mining operations; National Standard for Licensing Persons Performing High Risk; approved by Australian Standards reflected in National Standard for Licensing Persons Performing High Risk;

Australia standards AS 4576 & AS1576 Pt 1-8; as well as Building Codes and Regulations.

Production training courses are held on the Basis of LLP "YKK" in Atyrau, Aktau, Bautino in accordance with the requirements of Kazakhstan

Note: Students must have "Blue books" certificates.

Introduction to the Coordinated incident Control System (SIMS)

SIMS (Coordinated Incident Control system) is an introductory program for personnel who need to acquire knowledge of incident management but do not play an active role in it. The key elements of the program are as follows:

Key elements of emergency management are specified in accordance with CIMS standards;
Demonstrate knowledge of Sims elements, terminology, and structures;
Demonstrate knowledge of procedures for the control of accidents in the industrial sector SIMS.
The duration of the course is designed for 1 day, but subject to the needs/practical exercises of the client, the duration of the program can be extended.

Duration: 1 Day + 2 x tasks to be performed on the client's request.

Introductory Training on large-Scale Emergency Management (MEM1)

This training course is designed to familiarize staff with the functions, roles, and responsibilities of the main members of the emergency team during emergencies. Familiarization of personnel with the Plan of Liquidation of Accidents of the client and the principles of Emergency Management.

Leadership and Team Management;
Plan emergency response;
The simulated scenarios;
Means of communication;
Team exercises.

Duration: 2 days.

Training course on the Control of large-Scale Accidents at the Ground Production facility / Head Office (MEM) MEM 2

This part of the course is designed to provide practical training and familiarization of personnel with the responsibilities for crisis and Emergency Management at onshore production facilities, as well as methods and techniques of effective emergency management, and to support personnel working at offshore facilities to meet the corporate goals of the client. The office large-Scale emergency Management (MEM) training course, tailored to your business, covers the following:

Understanding the MEM process at sea;
Combining the principles of Control and Command;
Communications and information management;
Working with the media;
The Roles and Responsibilities of Emergency Management.;
The bond of kinship
The continuity of the activities.

Duration: 2 days.

Large-Scale emergency Monitoring (MEM) MEM 3 Training and Assessment

Training (MEM) Instruction and Assessment are primarily intended for chiefs of the Offshore Installations (OEM) and staff marked in the future on the position of the Chief of Naval Installations (OIM) or on managerial positions of production facilities. The purpose of this program is to develop the skills to Control large-Scale emergencies of established personnel holding a senior position in the Management and Response to emergencies at production facilities. The course covers the theoretical part of the emergency Management class, a minimum of 9 practical exercises with computer-based simulation. The performance of tasks by each participant is officially assessed as a Responsible Person in each scenario of the incident.

Prerequisite: Previous experience in Emergency Response procedures or training in large-Scale emergency Control (MEM 1)

Duration: 3 days.

Incident investigation

Methods and tools for the investigation of accidents and accidents in the workplace.

Duration: 4 hours.

Ensuring safety in the performance of collective work

Principles of workplace safety and their application in practice, taking into account the duties of the employee and the employer.

Introductory course on work permit work orders (for users)

Course for staff working on system clothes-tolerance and participating in job safety analysis and program administration.

Duration: 2 hours.

Work order tolerances course (for users) (Level 1)

The system of issuing work permit orders and instructions for the submission of applications for work permit orders.

Duration: 1 day.

Course on work permits (for persons with the right to sign Level 2)

The system of issuing costumes-tolerances to work to staff, approving the issuance of outfits-tolerances.

Duration: 1 day.

An introductory course in HSE

This course is designed to assist customers in conducting introductory training on HSE for a large number of employees engaged in special projects. It includes a wide range of mandatory courses: first aid, basic firefighting, familiarization with the system of issuing permits, access to enclosed spaces and security in the performance of collective work. The course can be reworked to meet customer requirements.

Duration: 4 hours or on request.

OPITO gas monitoring

Principles and procedures for the control of the gas environment and the use of equipment for the control of the gas environment.

Duration: 12 hours.

Junior NCOC air sampling specialist

Required for those taking the workplace of the following and has responsibility for monitoring security through constant monitoring of the place of fireworks. If an evaluation is required, the personal commitment of this role will be evaluated against TG3.

Preliminary requirement: HSE Induction.

Duration: 3 hours.

NCOC air sampling expert

It is required for those involved in the control of the use of suitable gas detection equipment and auxiliary devices, compliance with the specified volumes and frequency of sampling activities and their limits, documentation of the results of air sampling according to the NDPR and informing the relevant personnel.

Prerequisite: HSE induction, WRAP & TRUE, PW Level 2.

Duration: 8 hours.

Senior air sampling specialist NCOC

It is required for those who are associated with the identification of hazards associated with the presence of sediment in confined spaces, monitoring the use of suitable equipment, ensuring the selection of a representative sample of the atmosphere of a confined space.

Prerequisite: CSE ML, HSE induction, WRAP & TRUE, PW Level 2.

Duration: 12 hours.

Hydrogen Sulfide (H2S) course level 1 OPITO

Overview of hydrogen sulfide hazards, hydrogen sulfide detection methods and protection measures in high-risk areas.

Duration: 4 hours.

Hydrogen Sulfide (H2S) course level 2

This course was developed for staff, which is required to log onto classified by Nigerianization (yellow and red zone) the territory that is part of their standard job responsibilities. The course includes theoretical and practical parts.

Prerequisites: a Prerequisite for the course is the availability of a Basic course on Offshore/Onshore Site H2S Ind and FFT

Duration: 8 hours.

Workplace Safety observer

Specialized course for personnel supervising the conduct and control of fireworks and works in a confined space.

Duration: 12 hours (1+8) 2 days.

Safe work at height

A statement of the legal requirements for safety in the performance of work at height, the use of safety devices and an explanation of the relevant systems to perform work at height.

Duration: 1 day.

Use of safety systems for protection against falls from a height

Comprehensive training in all aspects of installation, maintenance and use of safety systems used to perform work at height, the study of legislative requirements, the study of fixing points and procedures for planning rescue operations and actions in case of emergency.

Duration: 2 days.

The entrance to the confined space Advanced level (with AVDA)

Theoretical course on obtaining work permits for entry into tanks or into a confined space, methods of work, instructions and methods of use of various breathing apparatus in a confined space.

Duration: 2 days.

The entrance to the confined space Standard course (without the use of AVDA)

Theoretical course on obtaining work permits for entry into containers or into a confined space, the method of performing work in the absence of hazardous substances in the air.

Duration: 1 day.

Salvation in a confined space

Theoretical and practical training and development of skills to extract the victim from the tanks and enclosed space, careful transportation of victims, the use of ropes, tripods and equipment for lifting people.

Prerequisite: a Prerequisite is training in the modular standard 18426 and 3058 or the passage of the previous course at the entrance to a closed space.

Duration: 2 days.

Training course on working at height

The AIM of the COURSE is to provide students with knowledge and skills on the methods of descent and elevation of the victim and the use of basic rescue systems in a safe and effective way.

COURSE CONTENT – On completion of this course, students will be able to demonstrate knowledge and competence in the theory and practice in the following areas:

Understanding legislation and standards;
Methods of raising and lowering the victim;
Rescue devices;
Emergency rescue equipment.

COURSE DURATION – the Course is held for 5 days, including 4 days of training and 1 day of knowledge assessment. For convenience, if necessary, it can be divided into 2 parts – Level 1 in 2 days and the subsequent Level 2, including the remaining 3 days.

Duration: 1 day.

Training course on rescue at height

The AIM of the COURSE is to provide the listener with fundamental knowledge of industrial mountaineering and rescue, as well as the skills necessary to access the area, raise and lower the affected and basic drilling rigs in a safe and effective way.

COURSE CONTENT On completion of this course, students will be able to demonstrate knowledge and competence in the theory and practice in the following areas:

Understanding legislation and standards;
Methods of raising and lowering the cable;
Ways to save by using a dual tether;
Rescue methods with a single operator;
Methods of raising and lowering;
Rescue devices;
Rescue equipment;
Rescue team actions;
Training on the treatment of victims.

Prerequisite: a certificate of course Work at height is a necessary condition.

Duration: 5 days.

Training courses for slingers and riggers (Repeat course)

Basic course on the use of handling equipment and mechanisms for personnel working as handymen at production facilities. The content of the course includes familiarization with the concept of safe work load gripping equipment, maintenance, and inspection of fiber ropes, chains, steel and wire ropes, frames, ring slings, and the practice of slinging, cargo location and signaling crane operator.